How to set up an IPTV MAG Box

What you will need is:

1. To register your MAC address, if you have not done this already then you will need to register with us at iptvdigi for your free IPTV trial. The main thing here is to input the correct MAC address so that we can add you to our servers.
2. 5 minutes so that you can set up the box which is so easy, you will then see why we are ranked No.1 for IPTV with over 40,000 box sets, and movies in over 33 countries.

Where is my MAC Address?

If you are looking at this with a blank expression on your face as you’ve never heard of a MAC address don’t worry, grab your MAG IPTV box and turn it over to the bottom and you will see the MAC code. The MAC address looks like this 00:1a:79:00:00:00

5 steps to install IPTV on your MAG Box:

Step 1: Plug your MAG device into the power, connect the HDMI cable to the TV and box, and connect the LAN cable from the router to the box or the WIFI adapter to the box.

Step 2: When loaded up click ‘Settings‘. Click on ‘System settings‘ and click on ‘Servers‘.

Step 3: Click on ‘Portals‘.

Step 4: You will see the ‘Portal 1 name‘ line enter the following: uktv.co/
Below that you will see ‘Portal 1 URL‘, enter the URL you received in your confirmation email.
Be 100% sure you enter this correctly.

Step 5: When you have done all of the above click ‘OK‘ on your remote to save the details.

Now press ‘EXIT‘ 2 times on the remote control and restart the portal.

You should now be ready to watch your Live UKTV.

NOTE: If you are using a MAG 250 or MAG 256 and your portal does not load it could be that the channels we have are too many for your device.
Let us know about this and we can deactivate most of the other countries that you would never use.

This will reduce the load on the mentioned devices and allow your system to work.

IPTV MAG Box – Your STB is Blocked

Should you see a message on your MAG Box once you have restarted the portal that says ‘Your STB is blocked, Call the provider’ Don’t worry it is easy to solve.
It normally means that your MAC Address is not yet active or you have supplied an incorrect MAC code when registering with us.
If this is the case please double-check the MAC Address underneath the MAG STB and send it to us again so we can add it for you.

How to set up an IPTV MAG Box

What you will need is:

1. To register your MAC address, if you have not done this already then you will need to register with us at UKTV for your free IPTV trial. The main thing here is to input the correct MAC address so that we can add you to our servers.
2. 5 minutes so that you can set up the box which is so easy, you will then see why we are ranked No.1 for IPTV with over 40,000 box sets, and movies in over 33 countries.

Where is my MAC Address?

If you are looking at this with a blank expression on your face as you’ve never heard of a MAC address don’t worry, grab your MAG IPTV box and turn it over to the bottom and you will see the MAC code. The MAC address looks like this 00:1a:79:00:00:00

5 steps to install IPTV on your MAG Box:

Step 1: Plug your MAG device into the power, connect the HDMI cable to the TV and box, and connect the LAN cable from the router to the box or the WIFI adapter to the box.

Step 2: When loaded up click ‘Settings‘. Click on ‘System settings‘ and click on ‘Servers‘.

Step 3: Click on ‘Portals‘.

Step 4: You will see the ‘Portal 1 name‘ line enter the following: uktv.co/
Below that you will see ‘Portal 1 URL‘, enter the URL you received in your confirmation email.
Be 100% sure you enter this correctly.

Step 5: When you have done all of the above click ‘OK‘ on your remote to save the details.

Now press ‘EXIT‘ 2 times on the remote control and restart the portal.

You should now be ready to watch your Live UKTV.

NOTE: If you are using a MAG 250 or MAG 256 and your portal does not load it could be that the channels we have are too many for your device.
Let us know about this and we can deactivate most of the other countries that you would never use.

This will reduce the load on the mentioned devices and allow your system to work.

IPTV MAG Box – Your STB is Blocked

Should you see a message on your MAG Box once you have restarted the portal that says ‘Your STB is blocked, Call the provider’ Don’t worry it is easy to solve.
It normally means that your MAC Address is not yet active or you have supplied an incorrect MAC code when registering with us.
If this is the case please double-check the MAC Address underneath the MAG STB and send it to us again so we can add it for you.